Rectangular notching equipment tools
The rectangular cut notching equipment is a tool for the notching stations in Geka’s hydraulic ironworker machines. With this notching tool you can obtain a rectangular cut on the outer perimeter of flat bars or sheet metal.
The rectangular notching equipment performs open rectangular notching operations, which means that one side of the rectangle is at the border of the profile, the same profile border that you place in the inner part of the notching tool will be the one to be open to the outside.
The maximum capacities for this rectangular cut notching tool are the following ones: 1 27/64″ of width, 2 3/32″ length and 5/16″ of thickness.
Our wide range of notching tools can also allow you to notch several standard and special shapes. Customers can also make their own tailor-made tools through our technical support service. All of them can be adjusted to the standard machine easily and quickly.
If you have any unsolved doubts that we can help you with regarding this notching tool or if need technical support or advice, please contact our Geka experts to help you with this equipment.
The rectangular cut notching equipment is available for the Geka ironworking machines in the Bendicrop, Multicrop, Minicrop and Hydracrop series. In the list below you may find the maximum capacity of the rectangular equipment for each model.
Rectangular notching equipment by machine
| MACHINE | Width | Length | Material Thickness |
|---|---|---|---|
| Minicrop | 1 9/16″ | 2″ | 3/8″ |
| Multicrop | 1 9/16″ | 2″ | 3/8″ |
| Bendicrop | 1 5/8″ | 3 1/2″ | 3/8″ |
| Hydracrop 55 | 1 5/8″ | 3 1/2″ | 3/8″ |
| Hydracrop 80 | 2 3/64″ | 3 35/64″ | 15/32″ |
| Hydracrop 110 | 2 3/64″ | 3 35/64″ | 33/64″ |
| Hydracrop 165 | 2 9/32″ | 4 21/64″ | 5/8″ |
| Hydracrop 220 | 2 9/32″ | 4 21/64″ | 5/8″ |
